Week 4

 Week 4 - FINAL LAB DAY!!


We finished the project off by connecting the smaller prototype to the circuit in order to check that they work correctly. Naomi changed the time interval of the project during this as well. Finally we finished off the blog (evidently) and got the poster printed.

When designing this poster, we chose a colour scheme related to ranches—brown soil and green pastures—hoping to create a vibrant atmosphere that allows viewers to intuitively feel the warmth of nature and the vitality of life. Additionally, Elys provided the background story, which tells a vivid tale of a sick pony in need of care, adding an emotional depth to the project.


On the technical side, Naomi offered insights into the coding logic and software workflow, helping to clarify the project’s structure, while Yiran was responsible for hardware support to ensure its smooth implementation. Yuhan contributed by envisioning the project’s future development, encouraging us to think beyond the present and consider its long-term potential.

After 4 weeks of hard work, with many ups and downs, our project is completed! 

See you again,



2P47 :)


Comments

Post a Comment

Popular posts from this blog

Week 3

Image
 Due to waiting on parts this week, we decided it was a good time to begin to assemble our prototypes.  Using scrap MDF boards, Elys made a half scale prototype. With sides being X in length and front, back and bottom panels being 2X length. Using a circular saw, Elys cut grooves into the front and back panels, these grooves were close together in order to be able to create 1 large groove where the lid can be on a track and move back and forth correctly. In the model, the lid is simply a piece of MDF to demonstrate the groves and track, however ideally it would be a concertina lid. The concertina lid would shrink in size when open, being conscious about space and then grow in length again when closing. Unfortunately, the motor wasn't able to move the MDF panel and due to parts not arriving in time, we decided to use this prototype as a stationary model.  Instead, we designed and built a smaller prototype, with the Arduino power and the motor in mind. To reduce the load an...
Read more

Week 2

Image
 This week we will begin assembling the circuit, as well as testing the code.   Yiran and Yuhan connected the circuit, based on the schematic that had been produced the week before. Once this had been set up Naomi tested the code with the circuit and debugging any issues that arose. Due to a lack of components in week 1, the code was written blindly so took a little while to check it worked correctly and efficiently. The circuit worked brilliantly and produced exactly what we wanted, meaning that we had completed the first half of the project.  As a team we finally  discussed whether to add a Wi-Fi or Bluetooth module. This would allow us to develop an app in order to control the Arduino remotely, with the user being able to adapt the time intervals without touching the code. Ordering a Seeit ESP32-DEV-30P bluetooth module, which allows for a wifi and a bluetooth connection. Following this plan, Naomi began on a graphical user interphase, as seen on the right. T...
Read more